Best VPS For Scrapebox
Why It Makes Sense To Use A Scrapebox VPS
VPS is the abbreviation for Virtual Private Server. Put simply, a VPS is a PC that you can use just like a PC you have at home. You can install programs on the VPS, run scripts, surf the internet, host websites – everything you could do on a server you have at home. Only that the VPS is not at home in the living room, but possibly in another country.
Basically, a VPS is the same as a dedicated server. The only difference between VPS and Dedicated Server is that several users use the VPS at the same time and only 1 user uses the Dedicated Server at a time. (Of course, with a VPS server the other users cannot access the data and programs of another user. You use the same server together, but everyone has their own private area).
Here you can read more information about VPS Server.
Top 3 VPS Hosting Providers:
- max RAM: 6 GB
- max Storage: 75 GB
- max Bandwidth: 2 TB
- max RAM: 32 GB
- max Storage: 320 GB
- max Bandwidth: 10 TB
- max RAM: 912 GB
- max Storage: 3.8 TB
- max Bandwidth: 12 TB
What Are The Advantages Of Running Scrapebox On A VPS?
A VPS server usually has a much faster connection to the internet than the normal user has at home. If you work regularly with Scrapebox and in particular create large Auto Approved Lists or comment a lot automatically with Scrapebox, then you quickly reach the limits of your home Internet connection.
When I used Scrapebox at home on my PC and didn’t have a Scrapebox VPS server yet, the program used my internet connection so much that I could hardly do anything else at the same time. And this is very annoying in the long run and not really an acceptable condition. In addition, Scrapebox was also slow. At that time it took me 9 hours to edit an Auto Approved list with about 30.000 URLs with the Fast Poster. There is really little joy when you have blocked your PC for about 19 hours and can’t do anything else.
On my smaller Scrapebox VPS with 6 Terabyte Internet connection I can completely comment the same Auto Approved list with approx. 30,000 URLs in approx. 1 hour with the Fast Poster. 1 hours vs 9 hours is a huge difference. And I can use my PC at home again at the same time, without everything being extremely slow.
What Should I Consider If I want To Use Scrapebox On A VPS Server?
Scrapebox is a Windows program. Under Linux it runs only with the help of an emulator. If you are not so familiar with Linux, you should better choose a Windows server to avoid difficulties. Windows VPS servers are a bit more expensive than Linux VPS servers, but I think the advantages of a Windows VPS outweigh nevertheless if one has like me of Linux no idea at all.
Not all VPS server providers allow the use of Scrapebox on their servers. Therefore you should always ask the provider if he allows it before you rent a VPS server. Otherwise you pay in the worst case a month rent for a VPS server which you can not use at all as you intended. Or you rent a VPS server directly from a provider that you know for sure will allow you to use it.
Which Equipment Should A VPS Have At Least?
Scrapebox uses relatively much RAM and CPU. Although Scrapebox often doesn’t use both at the same time, there should still be enough of both available. The Fast Poster, for example, uses hardly any RAM, but a lot of CPU. The harvester uses exactly the opposite, it uses a lot of RAM, but little CPU.
The size of the lists you edit also plays a big role when it comes to the question of how much RAM you need. Basically you can hold on to it: The larger lists you create and edit, the more RAM and CPU you need. For example, if you create lists with 500,000 URLs or more and then edit them with the Link Checker or Do Follow Test, you will definitely consume a lot of RAM.
512 MB RAM is in my opinion the minimum if you edit a small to medium list. 1024 MB RAM is needed when editing larger lists and 2048 MB RAM when editing larger lists and running multiple instances of Scrapebox at the same time.
If you want to run on the VPS at the same time as Scrapebox other not quite so memory hungry programs like Bookmarking Demon or Article Marketing Robot, then 512 MB RAM is not enough by the way. In this case you should have at least 1024 MB RAM. (You should not even think about Xrumer with 1024 MB RAM already used by other programs. For this you would need more RAM again).
Tips How To Best Use Scrapebox
Most SEO’s use it to create large link lists, but on closer inspection you can do much more with it!
The basic function of the tool is the determination of URLs which are in the context of certain keywords. So you only have to deposit some keywords and already “scraped” the tool thousands of URLs on which the deposited words occur.
Furthermore, the user can search for so-called “footprints”. An example of this would be the text “powered by WordPress”, which is stored in the footer on WordPress pages by default. Countless of these footprints exist on the net and with Scrapebox it is possible to find domains based on these engines. Ideally, footprints are combined with keywords in order to find relevant domains on fixed engines.
Even if many people believe that Scrapebox would be a tool with which you can search exclusively for URLs for spamming, there are many possibilities to get backlinks, which are clearly classified as Whitehat.
In the following I would like to introduce some small Scrapebox Use Cases to you, on which I fall back again and again. So then, let’s start with Whitehat SEO!
Whitehat SEO With Scrapebox
Scrapebox Use Case 1: Find Infected Pages.
In addition to the standard functions, Scrapebox can be extended with valuable free addons. One of these addons is called “Malware and Phishing Filter”.
With this addon you can check URLs for malware. It’s almost creepy to see how many webmasters don’t notice that their site is infected by such malware.
Once you have found some of these infected sites, it is worth taking a look at the domain metrics. It is not uncommon for these sites to be strong domains, which are well worth a guest article. Afterwards you only have to write to the webmaster and inform him about the infection. At best one attaches still some Tipps for the removal of the problem to the Mail. About the guest contribution one should not speak at this point yet.
The webmasters show themselves in most cases very recognizable, whereby a promising business relation can be developed. If the contact is, one can extend the feelers after possible guest contributions. Only rarely do webmasters reject this suggestion.
With this method, one should make sure that one determines the mail address of the webmaster through Scrapebox or a sandbox browser, so that one is not infected with malware oneself.
Scrapebox Use Case 2: Find Guest Posts Directly.
The second possibility to get guest posts is to search directly for the words “guest post”, “guest author” and “guest article”. In combination with other keywords, Scrapebox finds pages that actively ask for guest articles or that have already published guest articles.
Especially on large pages the addition “This is a guest contribution of xyz” is often added to the posted articles, which makes them fall exactly into our search grid.
If a Website already published guest articles, the chances are good that also further guest articles are published. So why not ask?
I myself have already published numerous guest articles for my other brandings in this way. However, make sure that the backlinks are set as “dofollow” links before the request, otherwise you will have nothing of the link power. But also in such a case you can profit from a guest article, because you can get some organic traffic from the site.
Scrapebox Use Case 3: Find Broken Links.
With the free “Broken Link Checker” addon you can check URL lists for their availability. If you find some so-called “Broken-Links”, it’s worth contacting the webmaster.
Offers to replace or supplement the article and replace the link with yours. In this way, you’ll be able to get new backlinks for your own page extremely quickly.
Scrapebox Use Case 4: Use Picture Theft
You know it. You laboriously create a valuable info graphic or a header image for a certain product and a few months later other webmasters use it on their pages.
With Scrapebox, one can draw a lasting advantage from these images. All you have to do is to give the image file a cryptic name before uploading, which has to be clearly assigned. An example for such a name would be “hjgr567a1”.
Afterwards, one can search for this file name with Scrapebox. For this you need the free addon “Google Image Grabber”, which can be installed via the built-in addon database.
If Scrapebox has found what you are looking for, you can write directly to the webmaster and ask for a guest contribution in return. Of course you have the right to ask for a source and the link, but a guest contribution has the advantage that you can write a topic-relevant text in which the back link to your own page is embedded.
Just because of the fear of legal consequences, most people agree with this proposal. An ideal possibility to generate high-quality backlinks.
Conclusion: Scrapebox is more than just a spam tool
As you can see, with Scrapebox you can operate Whitehat SEO. Especially in connection with the Google search operators there are numerous possibilities.
Of course, most users will continue to be on the move in the black hat area. No wonder, after all you can implement very lucrative strategies with this tool. Some examples would be:
- Automated blog comments in which, for example, affiliate links are embedded.
- Scrapping of proxy servers for well-known SEO tools like GSA, Insane Google Ranker, FollowLiker etc.
- Creation of large sitelists for GSA, which can be used to post qualitative backlinks.
- Resources for Spintax scraping. For example pictures and videos
A frequently criticized aspect of Scrapebox is the average scrape rate. This refers to the number of URLs per second that Scrapebox can determine. Within the software, the providers also provide access to various public proxies (called “server proxies”), which enable average scrape rates of 17-45 URLs/sec.
In fact, this is a very low scrape rate, which consequently requires a much longer program runtime to farm large URL lists.
With dedicated proxies you can increase this rate to several hundred URLs per second, but Google blocks these proxies temporarily after a few minutes.
The solution to this problem is “backconnect proxies“, which change the IP every few minutes and thus guarantee permanent functionality. Scrape rates of 200-300 URLs per second are easily possible here. However, Scrapebox is bitching about with these proxy servers, which means that only a handful of providers actually work.
A frequently criticized aspect of Scrapebox is the average scrape rate. This refers to the number of URLs per second that Scrapebox can determine. Within the software, the providers also provide access to various public proxies (called “server proxies”), which enable average scrape rates of 17-45 URLs/sec.
In fact, this is a very low scrape rate, which consequently requires a much longer program runtime to farm large URL lists.
With dedicated proxies you can increase this rate to several hundred URLs per second, but Google blocks these proxies temporarily after a few minutes.
The solution to this problem is “backconnect proxies”, which change the IP every few minutes and thus guarantee permanent functionality. Scrape rates of 200-300 URLs per second are easily possible here. However, Scrapebox is bitching about with these proxy servers, which means that only a handful of providers actually work.
So that you can achieve high scrape rates without being blocked by Google, you need http backconnect proxies. Unfortunately not all providers work equally well.